Beurer BM 26 Bedienungsanleitung PDF herunterladen (Seite 17)

Important: The instrument should only be operated with the

original cuff. The cuff is suitable for an arm circumference of

22 to 35 cm.

A larger cuff for upper arm circumferences from 30 to 42 cm is

available from retailers or the service address under order no.

162.973.

Correct posture

•

Rest for approx. 5 minutes before each measurement. Other-

wise there may be divergences.

•

You can perform the measurement either sitting or lying down.

Always make sure that the cuff is on a level with your heart.

•

To carry out a blood pressure measurement, make sure you

are sitting comfortably with your arms and back leaning on

something. Do not cross your legs. Place your feet flat on the

ground.

•

In order not to distort the result, it is important to keep still

during the measurement and not talk.

Select memory

Press the SET button. Select the desired storage space by

pressing the -/+ function buttons. You have 4 memories with

30 spaces each to store the measurements of 4 different peo-

ple separately or to separate measurements taken in the morn-

ing and at night. Confirm your selection with the button

Measuring blood pressure

•

Put on the cuff as described previously and assume the posi-

tion in which you want to carry out the measurement.

•

Start the measurement by holding the button . After check-

ing the display, during which all numbers light up, the cuff

pumps up automatically. Whilst the cuff is pumping up, the

device already calculates measurements for estimating the

necessary pump pressure.

If this pressure is insufficient, the device automatically

pumps more pressure.

•

Then the pressure in the cuff is slowly released and the pulse

is measured.

•

When the measurement has been completed, the remain ing

air pressure is released very quickly. The pulse, the systolic

and the diastolic blood pressure are displayed.

•

Measuring can be cancelled at any time by pressing the but-

ton .

•

If a higher pump pressure is always required, you can bypass

the additional pumping process by holding the M+ button

shortly after the pumping process starts until the desired cuff

pressure is reached. This should be approx. 30 mmHg above

the systolic value.

•

The Err icon appears if it has not been possible to perform

the measurement properly. Observe the section in these in-

structions on error messages/troubleshooting and repeat the

measurement.

•

The device switches off automatically after 3 minutes.

Wait at least 5 minutes before taking another measurement!

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare

Beurer BM 26 Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gesundheit und Hygiene Beurer BM 26